Menu

Driven by the desire to create a trailer to fit many operations, the  Hyundai Original® can be custom built to meet the specific needs of your operation.

 

FEATURES (Click blue dots to learn more)

Original REAR

FEATURES & BENEFITS

  • Corrosion Resistance Package includes HOT-DIP GALVANIZED steel rear frame, rear impact guard, inner and outer landing gear legs, landing gear mounting brackets and bracing, license mounting plate and mid turn signal bracket.  All standard equipment for extended service life and superior appearance.

  • Six(6) pick-up plate longitudinal channel sections for maximum strength for fifth wheel to prevent "dishing".

  • Extra deep base rail with rivet guards.

  • Logistics slotted side posts standard on 12, 16 and 24 centers as well as a logistic slotted rear frame.

SPECIFICATIONS

STANDARD FEATURES

  • Inside height and rear door opening height of 110"
  • Sealedwiring harnesswith internal ground
  • Hot-dip galvanized steel rear frame and rear underride guard
  • Easy operating door lock rodswith rubber handle grips for operatorcomfort and safety
  • Water and debris resistant tail light housing
  • Computer controlled machine riveting of sides and roof
GENERAL
Length Exterior: 53' 0"
Interior: 52' 6"
Width Exterior: 102.36"
Interior: 99" lining to lining
Height Exterior: 13' 6"
Interior: 110
Capacity 68,000 GVWR
3970 cu. ft. of interior volume
Tare Weight 13,900 lbs
   
BODY CONSTRUCTION
Side Sheets Side sheets .050" thick pre-painted white aluminum.
Side Posts Galvanized steel posts on 24" centers, 1-1/8" deep × 5" wide, with posts on 12" centers over coupler and landing gear area.
Roof One piece, 0.040" thick, full width aluminum sheet, tension leveled prior to
installation.
Roof Bows Galvanized steel anti-snag hat section on 24" centers. Pre-bonded to roof sheet. Roof bows installed using four solid rivets, two per end.
Front Wall Four hi-tensile, hat shaped, posts securely fastened with 6 heavy-duty fasteners and reinforced with a special angle clip, welded to the upper coupler and covered with 0.050 aluminum front sheets.
Rear Frame Hot-dip galvanized, hi-tensile steel construction 3/16" thick with low profile header, tube shaped posts. Forged steel angle irons in top corners for added rack resistance. Lights recessed in rear sill with heavy-duty protection bars with welded reinforcing bar between tail lamps.
Rear Doors Composite swing door, 0.50" composite panel. Dual durometer seals bonded to door. Four hinges and one anti-rack locking bar with nylon bushings per door. Lock handles fitted with rubber grips for operator comfort and safety.
Interior Lining Exterior grade plywood, 1/4" thick, installed horizontally over side posts. Exterior grade 1/2" plywood installed lower half of front wall and 1/4" over top height of frontwall.
   
UNDERFRAME
Crossmembers Four inch deep, hot rolled steel I-beam, 80,000 psi yield strength, located on 12" centers. Hat shaped crossmembers ahead of landing gear. Rear 4' of trailer has crossmembers located on 8" centers
Upper Coupler Floor A.A.R. rated king pin, 3-3/8" deep. Laminated Oak 1-3/8" nominal thickness with three screws per floorboard with a 1/8" steel diamond plate × 12" deep.
Landing Gear Hot-dipped galvanizedwing plate and support gear bracing mounted to five crossmembers. Two speed, 50,000 lb. capacity, A.A.R. rated, with 10"×10" sandshoes. Roadside crank handle.
Rear Underride Guard Constructed per CMVSS 223 Regulations. Hot-dip galvanized underrid guard. Bolt-on type with special 4" square Guard tube with recess for conspicuity tape with end caps for operator safety
   
SUSPENSION
Suspension Hendrickson Vantraxx HKANT40K Air Ride
Hub & Drums Ten stud, hub piloted with outboard mounted brake drums
Wheels Pre-painted white 8.25 × 22.5 steel disc.
Tires Lowprofile 22.5 radial tires.
Axles Five inch round, 22,500 lb. rating, 77-1/2" track.
Brakes Non-asbestos lining 16.5" × 7" quick change type,'S' cam operated automatic slack adjuster.
ABS System Two sensor, one modulator valve (2S/1M) system, no diagnostics tool. PCL4Trucks compatible system.
Oil Seals Stemco Platinum Performance.
   
ELECTRICAL
Lights & Wiring Color coded 12-volt sealed wiring system, internal ground, and special watertight molded connectors to accept sealed lamps.
   
PAINT & FINISH
Paint Steel front impact guard is abrasive blasted, coated with zinc rich epoxy primer andwhite finish top coat
Undercoating Flooring is pre-undercoated and crossmembers are dipped in a black color coating prior to installation. Landing gear and running gear areas painted with gray color non-hardening rust preventative.
Decals D.O.T. approved Hyundai Translead logo conspicuity tape and FHWA inspection sticker.
Miscellaneous Truck-Lite P/N 97960 registration cardholder on frontwall. White mud flaps with Hyundai logo mounted on rear of slider subframe.
Warranty Limited five yearwarranty.

PHOTOS

OPTIONS

Hyundai Translead offers a wide variety of options and packages to fit your operations.
Scuff Option

Additional scuff options available in wood, plastic or steel to fit your operations.

EcoFairing Side Skirt

Hyundai Translead offers the HT EcoFairing aerodynamic side skirt which meets US EPA SmartWay and California Air Resource Board requirements for greater than 5% fuel savings

Lift Gate Factory Install

Lift gates can be factory installed so that your trailer is ready for use when you need it.

Roll Up Doors

Roll Up Doors available from various manufacturers.

PSI System

To assist in achieving greater fuel savings, PSI systems can be installed at the factory.

Scuff Option

Additional scuff options available in wood, plastic or steel to fit your operations.

Dome Lamps

For increased interior visibility dome lamps are available from various manufacturers.

Wide Base Tires

Wide based tires from various manufacturers are available to meet both EPA SmartWay and California Air Resources Board requirements.

REQUEST A QUOTE

Thank you for your interest in Hyundai Translead products. 

Please complete and submit the questionnaire below to the best of your knowledge and a Hyundai Translead sales representative will follow-up with you soon with additional information on your quote. (Blank items will default to OEM's standard specification). 

Contact
Company
Address 1
Address 2
City
State
Zip
Province
Telephone
Fax
Email
Comments
Product Reefer Dry

DOWNLOADS